INPUT |
Connectors: |
XLR and 1/4" TRS (Pin 2 and tip hot) |
Type: |
Electronically balanced/unbalanced, RF filtered |
Impedance: |
Balanced > 40 kOhm, unbalanced >20 kOhm |
Max Input Level: |
> +22 dBu balanced or unbalanced |
CMRR: |
Typically >50 dB at 1 kHz |
OUTPUT |
Connectors: |
XLR and 1/4" TRS (Pin 2 and tip hot) |
Type: |
Servo-balanced/unbalanced, RF filtered |
Impedance: |
Balanced 30 Ohm, unbalanced 15 Ohm |
Max Output Level: |
> +22 dBm balanced, > +20 dBm unbalanced |
SYSTEM PERFORMANCE |
Bandwidth: |
20 Hz to 20 kHz, +0/-0.5 dB |
Frequency Response: |
0.35 Hz to 90 kHz, +0/-3 dB |
Noise: |
<</FONT> -96 dBu, unweighted, 22 kHz measurement bandwidth |
Dynamic Range: |
> 118 dB, unweighted |
THD+Noise: |
0.008% typical at +4 dBu, 1 kHz unity gain |
0.08% typical at +20 dBu, 1 kHz, unity gain |
<</FONT> 0.1% any amount of compression up to 40 dB, 1 kHz |
IMD: |
<</FONT> 0.1% SMPTE |
Interchannel Crosstalk: |
<</FONT> -80 dB 20 Hz to 20 kHz |
Stereo Coupling: |
True RMS Power Summing |
COMPRESSOR |
Threshold Range: |
-40 dBu to +20 dBu |
Ratio: |
1:1 to infinity:1 |
Threshold Characteristic: |
Selectable OverEasy? or hard knee |
Attack/Release Characteristic: |
AutoDynamic™ |
Attack Time: |
Program-dependent |
Release Time: |
Program-dependent |
Output Gain: |
-20 to +20 dB |
LIMITER |
Threshold Range: |
0 dBu to +24 dBu (off) |
Ratio: |
infinity:1 |
Limiter Type: |
PeakStopPlus? two-stage limiter |
Stage 1: |
PeakStop? brickwall limiter |
Attack Time: |
Zero |
Release Time: |
Zero |
Stage 2: |
Predictive intelligent program limiter |
Attack Time: |
Program-dependent |
Release Time: |
Program-dependent |
FUNCTION SWITCHES |
OverEasy?: |
Activates the OverEasy compression function. |
I/O Meter: |
Switches between monitoring input and output levels on the Input/Output Level meter. |
Bypass: |
Activates the direct input-to-output hard-wire bypass. |
OPERATING LEVEL |
(rear panel): |
Switches the nominal operating level between -10 dBV and +4 dBu simultaneously for both input and output levels. |
ST Link: |
Links channels in stereo pairs. Channels One and Three become the master channels. |
INDICATORS |
Gain Reduction Meter: |
8 segment LED bar graph at 1, 3, 6, 10, 15, 20, 25, and 30 dB |
Input/Ouptut Meter: |
8-segment LED bar graph at -24, -18, -12, -6, 0, +6, +12, and +18 dBu |
PeakStop™: |
1 LED to indicate PeakStop™ limiting |
Function Switches: |
LED indicator for each front-panel switch |
OPTIONS - Output Transformer |
Per Channel: |
Jensen? JT-123-dbx or JT- 11-dbx, BCI RE- 123-dbx or RE-11-dbx |
POWER SUPPLY |
Operating Voltage: |
Switchable: 100-120 VAC 50-60 Hz or 200-240 VAC 50/60 Hz |
Power Consumption: |
20 Watts |
Fuse: |
100-120 VAC:250 mA Slow Blow |
|
200-240 VAC:125 mA Type T |
Mains Connection: |
IEC receptacle |
PHYSICAL |
Dimensions: |
1.75"Hx19"Wx9"D (4.4cmx48.3cmx20.1cm) |
Weight: |
5.2 lbs. (2.4 kg) |
Shipping Weight: |
7.6 lbs. (3.5 kg) |
Note: Specifications subject to change without notice. |