|
제품특성
|
With a wealth of features – including dbx high-voltage, ultra low noise mic pre’s, Pantheon II reverbs, and a powerful software mixing board with dbx dynamics and hardware monitor reverb – the Lexicon? I•ONIX FW810S is more than just an 8-in, 10-out FireWireT™ audio interface. It’s a pro recording studio contained in a single rack unit.
The high-voltage, ultra low noise dbx mic pre’s on every channel provide optimal timbre and tonality on every track. And the newly updated Pantheon II plug-in provides smooth, lush Lexicon reverbs for creating ideal sonic spaces.
With built-in dbx Type IV™ conversion, your digital recordings will preserve their dynamic range even when levels get too high. They’ll acquire that forgiving, oversaturated quality once only found on big analog recorders. Type IV conversion actually gives you more headroom, capturing subtle details in higher level signals instead of hard clipping them.
Plus, the Lexicon I•ONIX FW810S adds a powerful software Mixer with integrated dbx dynamics (compresser, gate, limiter, EQ) to your digital audio workstation. The Mixer’s true-to-life interface design feels familiar from the second you start it, making it easy to adjust levels, route signals through 8 inputs and 10 outputs, and apply and preview reverbs and dynamics. And the I•ONIX FW810S does the processing, so you can mix and fine tune your recordings in real time with zero latency. You can even save and load snapshots of mixer settings. Save and load up to five monitor mixes – one for the main control mix, and up to four for individual band members. Or assign the I•ONIX FW810S to start up with a snapshot.
With so many powerful and useful recording studio tools, it’s more than just a FireWire interface. It’s the Lexicon I•ONIX FW810S.
The powerful software Mixer lets you easily route signal paths and apply real-time dynamics (compressor, limiter, gate) and EQ adjustments. The Ionix software suite also includes the new Pantheon II reverb plug-in from Lexicon and Toontrack’s EZ Drummer Lite. And it all works together seamlessly in Cubase LE 4 (also inclu |
| 상세스펙 |
|
Technical Specifications |
| Microphone Inputs: |
Female XLR Pin 2 Hot |
| Input Impedance: |
3kΩ balanced |
| Phantom Power: |
+48 Volts |
| Maximum gain: |
+55 dB |
| E.I.N. (at max gain): |
−127 dB @ 55 dB gain typical (150W source)
−130 dB @ 55 dB gain typical A-weighted (150W source) |
| Maximum Input Level: |
+8 dBu |
| Frequency Response: |
+/−1.5 dB, 20Hz - 20kHz |
| THD+N: |
<0.02%, 20Hz - 20kHz, <0.002%,1kHz, -6 dBu |
|
| Line Inputs: |
1/4” TRS balanced or unbalanced |
| Input Impedance: |
20kΩ balanced, 13kΩ unbalanced |
| Maximum Input Level: |
+22 dBu |
| Frequency Response: |
+/−1.5 dB, 20Hz - 20kHz |
| THD+N: |
<0.02%, 20Hz - 20kHz, <0.002%, 1kHz, +18 dBu |
|
| Instrument Input: |
1/4” TS unbalanced |
| Input Impedance: |
500kΩ |
| Maximum Input Level: |
+10 dBu |
| Frequency Response: |
+/−2.5 dB, 20Hz - 20kHz | | | |
|
현재위치 : 
