INPUTS
Connectors: XLR (pin 2 hot)
Type: Electronically balanced/unbalanced, RF filtered
Impedance: Balanced >50k ohm, unbalanced >25k ohm
Max Input Level: >+22dBu balanced or unbalanced
OUTPUTS
Connectors: XLR
Type: Electronically-balanaced/unbalanced, RF filtered
Impedance: Balanced 60 ohm, unbalanced 30 ohm
Max Output Level: >+20dBu balanced/unbalanced into 600 ohms or greater
CROSSOVER FREQUENCIES
Stereo Mode: Low/High: 45 to 960 Hz or 450 Hz to 9.6 kHz (x10 setting)
Mono Mode: Low/Mid: 45 to 960 Hz or 450 Hz to 9.6 kHz (x10 setting)
Mid/High: 45 to 960 Hz or 450 Hz to 9.6 kHz (x10 setting)
Filter type: Linkwitz-Riley, 24 dB/octave, state-variable
FUNCTION SWITCHES
Front Panel (Low Cut): Activates 40 Hz Butterworth, 12 dB/octave high-pass filter, one switch per channel
Phase Invert: Inverts the phase at the output, one switch per output
Rear Panel: x10: Multiplies the crossover frequency range by 10, one switch per channel
Mode: Selects stereo/mono and 2/3-way operation.
LF sum: Selects normal (stereo) or mono-summed low frequency operation.
INDICATORS
Stereo Operation: Green LED
Mono Operation: Yellow LED
Low Cut: Red LED per channel
x10 Green LED per channel
Phase Invert: Red LED per output (3 per channel)
SYSTEM PERFORMANCE
Bandwidth: 20Hz to 20kHz, +0/-0.5dB
Frequency Response: < 3Hz to > 90kHz, +0/-3 dB
Dynamic Range: >106dB, unweighted, any output
THD + Noise: <0.004% at +4dBu, 1kHz
<0.04% at +20dBu, 1 kHz
Interchannel Crosstalk: <-80dB, 20Hz to 20kHz
CMRR: >40dB, typically >55dB at 1kHz
Signal-to-Noise: Ref: +4dBu, 22kHz measurement bandwidth
Stereo Mode >94dB (Low Output)
>91dB (High Output)
Mono Mode: >94dB (Low Output)
>93dB (Mid Output)
>91dB (High Output)
POWER SUPPLY
Operating Voltage: 100 VAC 50/60 Hz; 120 VAC 60 Hz 230 VAC 50/60HZ
Power consumption: 15W
Operating Temperature: 32°F to 113°F (0°C to 45°C)
PHYSICAL
Dimensions: 1.75" H X 6.9" D X 19" W (4.5cm x 17.5cm x 48.26cm )
Weight: 3.7 lbs. (1.7 kg)
Shipping Weight: 5.4 lbs. (2.5 kg) | 
현재위치 : 
