상품 상세보기 : HOT 이벤트 7

PRX-725[전화문의]

[제품특징]

139 dB peak SPL

Dual 15" Differential Drive® low-frequency driver for low-distortion and higher SPL

1.5" diameter next generation JBL neodymium compression driver

JBL designed waveguide for accurate coverage

Efficient Class-D amplifier technology

Normal and Boost user selectable EQ presets

DSP input section, crossover, dynamic limiting, component optimization, selectable system EQ

Line level and direct microphone input capability

Professional XLR-1/4" combination inputs, RCA inputs, and XLR loop-through

Multiple injection molded handles with backing cup for easy transport

Integrated M10 suspension points for easy setup

Lightweight poplar plywood cabinets made structurally sound with tongue and groove joints and protected by JBL’s tour proven DuraFlex™finish.

Cloth backed, dent-resistant 16 gauge steel grilles

[제품스팩]

	Power Rating	1500 W
	Frequency Range (-10 dB)	Normal: 42 Hz – 18.5 kHz Boost: 40 Hz – 18.5 kHz
	Frequency Response (±3 dB)	Normal: 49 Hz – 17 kHz Boost: 46 Hz – 17 kHz
	Coverage Pattern	90° x 50° nominal
	Directivity Index (DI)	10.4 dB
	Directivity Factor (Q)	11
	Crossover Frequency	2.4 kHz
	Maximum SPL	Normal: 139 dB Boost: 139 dB
	Signal Indicators	Limit: Yellow LED indicates peak output has been reached and dsp limiter is acting Signal: Green LED indicates signal present Power/Standby: Blue indicates system has power and ready to pass audio, Red indicates system has power but is in a power saving mode and will not pass audio.
	Dynamic Control (Input)	dbx Type IV™ limiter circuit
	Input Impedance	20K Ohms (balanced), 10K Ohms (unbalanced)
	LF Driver	2 x JBL 275 (15 in) woofer
	HF Driver	1 x JBL 2408H-2 37.5 mm (1.5 in) annular polymer diaphragm, neodymium compression driver
	Enclosure	Trapezoidal, 18 mm, plywood
	Suspension / Mounting	8 x M10 Suspension Points, 1 x M10 pull back point
	Transport	2x integrated handle with injection molded backing cup
	Finish	Obsidian DuraFlex™ finish
	Grille	Powder coated, Obsidian, 16 gauge perforated steel with acoustical transparent black cloth backing.
	Input Connectors	2 x Balanced XLR / 1/4 inch input, 2 x unbalanced RCA input
	Output Connectors	1 male XLR balanced output
	Dimensions (H x W x D)	1070.36 mm x 445.0 mm x 537.97 mm (42.14 in x 17.52 in x 21.18 in)
	Net Weight	37.19 kg (82 lb.)