[제품 스팩]
MSR-602 II POWER SUPPLY FOR MSR-604 II_?xml_:namespace prefix = o ns = "urn:schemas-microsoft-com:office:office" /> |
AC Input |
90-130/180-260 V AC 50/60Hz 150VA. |
Connector |
3 pin IEC with locking clip. |
Connectors |
9 pin D female: Loop out. |
9 pin D male: Loop return. |
Headphone Output |
Via LISTEN bus and MSR-604 II LISTEN switch. Input : via DC Loop out connector |
Weight |
7.0kg net |
Dimensions |
44mm x 482mm x 293mm |
MSR-6O4 II Active Signal Distribution system |
Input Impedance |
Mic:2kOhm. |
Line: 10kOhm, electronically balanced. |
Max. Input Level |
Mic: +13dBu./Line: +33dBu. |
Output Section |
Main (F.O.H) & Mon, electronically balanced |
Max. Output Level |
+3dBm, +13dBm, +23dBu, internally preset. |
Gain |
-40dB to +50dB. |
Mic/Line pad |
0/-20dB via panel. |
Frequency Response |
+/-0.5dB , 20Hz to 20kHz. |
Distortion (T.H.D) |
Less than 0.1% 20Hz to 20kHz @ 10dB below clip. |
Weight |
3.8kg net, 8.4 lbs. |
Dimensions |
44mm x 482mm x 293mm, 1.75" x 19" x 11.6". |
[제품 특징]
MSR-604 II는 4채널의 1입력 4출력 분배기(Active microphone/line level distribution system)로, 한 개의 입력을 4, 8, 12, 16 개의 채널로 출력할 수 있으며, MIC/LINE 스위칭, 게인 스위칭, MSR-602 II를 통한 모니터링, 팬텀파워 등의 추가적인 기능들을 갖추고 있습니다. 메인 콘솔과 모니터 콘솔의 출력을 분배하며, 두 개의 트랜스포머가 결합된 구조를 통해서 메인 PA 시스템으로부터의 분리가 필요한 어떠한 상황에서도 2500V의 독립된 출력을 제공합니다. 전원 장치인 MSR-602 II가 추가적으로 필요하며 구 모델 MSR-604와도 연결하여 사용할 수 있습니다.
MSR-602Ⅱ는 MSR-604Ⅱ의 Power supply이며 10개의 MSR-604Ⅱ기기에 전원을 공급 기능을 담당하고 있습니다. 또한 헤드폰 모니터 출력과 시그널 미터링 기능을 제공하며, 2개의 MSR-602Ⅱ연결하여 오동작을 방지하고 있습니다.
The MSR-604 II is a 4-channel one by four, active microphone/line level distribution system, capable of supplying 4, 8, 12, or 16 outputs from a single input. Each channel features:
- Electronically balanced input with transformer option.
- MIC/LINE switching, GAIN switching.
- LISTEN facility for monitoring via the MSR-602 II PSU.
- Phantom power.
- Active outputs for main FOH and monitor consoles.
- Two transformer-coupled feeds giving 2500V isolation for any application requiring isolation from the main PA system.
The system requires an MSR-602 II power supply, and is compatible with existing MSR-604 units (adapter cables required).Options:
- MSR-TIXII Input balancing kit.
- MSR-TOXII Output balancing for FOH and monitor outputs.
- 604-II-ADK PSU adapter cable for use with MSR-604 type 1 units.
The MSR-602 II is the power supply for the MSR-604 II and will run 5 MSR-604 II units. The unit also provides the headphone monitor output and signal metering. Two MSR-602 II units may be linked for fail-safe operation.
| |
|