MSP3 MSP5 MSP10/10M SW10 GENERAL Type Amplified, 2-way, bass-reflex powered speaker Biamp. 2-way, bass-reflex powered speaker Amplified bass-reflex powered speaker Crossover Frequency 4kHz 2.5kHz 2.0kHz - Overall Frequency Response 65Hz-22kHz (-10dB) 50Hz~40kHz (-10dB) 40Hz ~ 40kHz (-10dB) 25Hz ~ 150Hz (-10dB) Maximum SPL 98dB (1m) 101dB (1m on axis) 110dB (1m on axis) 111dB (1m on axis) Dimensions (W x H x D) 144 x 236 x 167 mm (5-11/16" x 9-5/16" x 6-9/16") 169mm x 279mm x 222mm (6-5/8" x 11" x 8-3/4") 265 x 420 x 329mm (10-7/16" x 16-9/16" x 12-15/16") 328 x 459 x 476mm (12-7/8" x 18-1/16" x 18-3/4") Weight 4.4kg (9.70 lbs) 7.5kg (16.5 lbs) 20kg (44.1 lbs.) 26kg (57.3 lbs.) SPEAKER SECTION Components LF: 10cm (4") cone HF: 2.2cm (7/8") Dome LF: 12cm(4-2/7") cone HF: 2.5cm(1") titanium dome LF: 20cm (8") cone HF: 2.5cm (1") titanium dome 25cm (10") cone Enclosure Bass reflex type Magnetic shielding construction AMPLIFIER SECTION Output Power 20W at 1kHz, RL=4Ω Biamplified system LF: 40W at 400Hz. RL=4Ω HF: 27W at 10kHz. RL=6Ω Biamplified system LF: 120W at 400Hz. RL=4Ω HF: 60W at 10kHz. RL=8Ω 180W at 100Hz. RL=8Ω Input Sensitivity LINE1: -10dB LINE2: +4dB INPUT 1: +4dB INPUT 2: -10dB INPUT 1: -6dB ~ +4dB INPUT 1~3: -6dB ~ +4dB Input Impedance LINE1: 10kΩ/RCA pin (unbalanced) LINE2: 10kΩ/XLR & Phone (balanced, Parallel) INPUT 1: 10kΩ/XLR balanced INPUT 2: 10kΩ/Phone INPUT 1: 10KΩ/XLR balanced INPUT 1~3: 10K/XLR balanced S/N Ω95dB (IEC-A weighting) Ω100dB (IEC-A weighting) Ω98dB (IEC-A weighting) Ω100dB (IEC-A weighting) Controls Level Control : LINE1 & LINE2 Tone Control : Low : High Power Switch : ON/OFF MASTER VOLUME CONTROL TONE CONTROL LOW: 4 position (+1.5dB, 0dB, -1.5dB, -3.0dB at 60Hz) HIGH: 3 position (+1.5dB, 0dB, -1.5dB, at 15kHz) Power Switch: ON/OFF MASTER VOLUME CONTROL TONE CONTROL LOW: 3 position (0dB, -1.5dB, -3.0dB at 50Hz) HIGH: 3 position (+1.5dB, 0dB, -1.5dB, at 10kHz) LOW CUT FILTER: ON/OFF (80Hz) Power Switch: ON/OFF MASTER VOLUME CONTROL VARIABLE LOW PASS FILTER (40Hz~120Hz) PHASE Switch (Normal, Reverse) Power Switch: ON/OFF Power Indicator Green LED: Power ON Green LED: Power ON Green/Red LED: Green=Power ON Red=Amp. Clipping Power Requirement US & Canadian Models AC120V 60Hz European Models AC230V 50Hz Australian Models AC240V 50Hz US & Canadian Models: AC120V 60Hz General Models: AC230V 50Hz US & Canadian Models: AC120V 60Hz European Models: AC230V 50Hz AT Models: AC240V 50Hz Power Consumption 30W 60W 150W 160W

 

 

 

- 음악 제작 시스템 가장 잘 어울리는 레퍼런스 모니터. - 컴팩트한 사이즈에, MSP의 고음질 사운드 실현 - 모든 필요에 대응하는 입력 단자, 실행 방식.

■ 10cm 우퍼와 2.5cm 트이터를 탑재한 2WAY 버스레프식
■ 20W의 파워엠프를 탑재하여 사이즈를 초월한 강력한 사운드 구현
■ XLR, 폰, 핀 단자 등 모든 용도로 사용 가능한 충실한 입력단자
■ 포스트 프로덕션에 사용 가능한 자기 방지 설계
■ 브라켓용 M5나사를 장착하여 천정 매달기, 벽면, 마이크 스탠드 설치 대응