[제품 스팩]
DriveRack480_?xml_:namespace prefix = o ns = "urn:schemas-microsoft-com:office:office" /> |
Number of Inputs/Connectors |
4 (Inputs 3 or 4 can be selected as an RTA mic input)Female XLR |
Impedance |
> 40 k ohm |
Number of Outputs/Connectors |
8, Male XLR |
A/D Performance |
dbx Type IV™ Conversion System |
Sample Rate |
48 kHz |
THD + Noise |
0.003% typical at +4 dBu, 1 kHz, 0 dB input gain |
Frequency Response |
20 Hz ~ 20 kHz, ± 0.5 dB |
Interchannel Crosstalk |
<-85 dB at 1 kHz, 0 dB input gain<o:p> |
Dimensions/Weight |
19”(W) × 3.5”(H) × 12.15”(D)/11 lbs. |
[제품 특징]
480은 DriveRack 제품군 중 최고의 제품으로 dbx의 모든 기술이 집합되어 있는 제품 입니다. 4개의 XLR 입력과 8개의 XLR 출력을 가지고 있으며 어떠한 종류의 설정의 변경도 가능한, 앰프와 스피커 사이에 필요한 모든 시그널을 제어할 수 있는 수많은 아웃 보드들을 통합한 시스템입니다. 480은 Pre Crossover EQ, notch 필터, 스피커 딜레이, 멀티 크로서버, 스피커 보정 EQ, 드라이버 얼라인 딜레이, 컴프/리미터등의 모든 기능을 내장하고 있어서 다른 외부 장비를 필요로 하지 않습니다.
또한 출력부에 내장되어 있는 컴프/리미터는 dbx사의 전설적인 명기인 160을 디지털화 한 것입니다. 채널 3, 4번을 통해 듀얼 타임 아날라이저를 사용할 수 있으며, 리모트와 GUI를 통해 컨트롤이 가능합니다. 100개의 유닛을 네트웍으로 연결하여 480s, 481s, 482s 또는 442와 함께 사용할 수 있습니다.
At the heart of the DriveRack® system is the 480. The 480 includes 4 inputs and 8 outputs which can be tailored for any configuration. By including every form of processing necessary to drive the signal from the mixer to the power amps, such as pre-crossover EQ, notch filters, speaker delay, multiple crossovers, speaker compensation equalizer, driver alignment delay, and compression/limiting, the 480 is truly the only box you’ll need for any sound system application. Two real time analyzers can be run simultaneously with RTA source inputs capable of being remotely switched on the fly. The 480 is fully programmable from the front panel, with the 480R remote control, or through a computer via the GUI port.