[제품 스팩]

입력: 2개의 밸런스
임피던스: >10k Ohms
CMRR: 65dB 50Hz ~ 10kHz
출력: 4개의 밸런스
소스 임피던스: <60 Ohms<BR>최소 로드: 600 Ohms
최대 레벨: 20dBm ~ 600 Ohms
주파수응답: 20Hz ~ 20kHz
대역폭: >110dB 20Hz ~ 20kHz
왜곡: < .02%@1kHz,+18dBm<BR>최대 딜레이: 300mS
입력 이득: _15dB in 0.1dB step
출력 이득: -60dB - +15dB in 0.1dB steps, and 'Off'
다이나믹 EQ 모듈: 2개
게이트 / 확장기: 2개
컴프레셔: 2개
리미터: 2개
크기: 44 x 482 x 300mm
무게: 3.5kg

[제품 특징]

최고의 음질 - 40비트 내부 데이터 패스를 통한 최적화된 이중의 정확한 신호 프로세싱은 100dB 이상의 대역폭을 유지한다. 하이 샘플링 레잇은 뛰어난 음의 청명함을 제공하는 최소의 필터링을 의미한다.

뚜어난 측쇄 프로세싱의 소음 게이트/확장기 - 하이 & 로우 패스 필터와 두개의 파라미터.

다이나믹 이퀄라이저 - 새로운 컨트롤과 정확성을 바탕으로 한 선택한 주파수 밴드만의 압축 또는 확장

Aux 출력으로 가는 루트가 되는 별도의 A.D.T.모듈이 있는 딜레이 라인 - 이것은 무대의 앞/뒤, 좌/우를 연주자의 무대로 사용할 수 있게끔 한다.

AES/EBU 디지털 입력과 출력 인터페이스는 옵션으로 가능하다.

Superb audio quality - carefully optimised double precision signal processing coupled with a 40-bit internal data path ensures a dynamic range in excess of 110dB. The high sampling rate means minimal filtering providing exceptional sonic purity.

A highly accurate 6 band parametric equaliser on each input, providing +15 to -30dB of gain at centre frequencies between 20Hz and 20kHz, with a wide range of 'Q's available between 0.4 to 128. All parameters feature fine resolution with 1/36 octave frequency steps, 0.1dB gain increments, and 100 'Q' settings. Any parametric section can also be set to operate as a high or low shelving filter.

A fully featured compressor with two bands of sidechain equalisation, and featuring variable knee and 'look-ahead' delay for absolute control.

A noise gate / expander, again with dedicated sidechain processing - high and low pass filters plus two parametrics. The 'look ahead' design allows the gate to open before the signal arrives, completely eliminating clicks.

A dynamic equaliser - compress or expand only the frequency band you choose, with unprecedented control and precision.
A delay line with separate 'A.D.T' module that may be routed to the auxiliary outputs. This allows for 'staging' of performers 'front/back' and 'left/right' of the soundstage.

A 'brickwall' limiter with sidechain EQ and 'look ahead' ability for pre-emptive adaptation to signal peaks, and so complete prevention of overshoot.

A harmonics generator to introduce controlled levels of second and third harmonic distortion, for simulation of 'valve' sound characteristics.

Three velocity-sensitive encoders provide a familiar and intuitive controlformat with all filter information displayed simultaneously on a 2 x 24character backlit LCD screen.

The comprehensive standard specification also includes 256 memories, PC card storage and remote control via MIDI, RS232 or RS485 ports, with security lock-out.

AES/EBU digital input and output interfaces are available as an option.

Input and output balancing transformers are also available as an option.
DP324 Specifications
Inputs 2 electronically balanced [++]
Impedance: > 10k ohms.
CMRR 65dB 50Hz - 10kHz.
Outputs 4 electronically balanced [++]
Source Imp < 60ohms<BR>Min. Load 600ohm
Max. Level +20dBm into 600 ohm
Frequency Resp. +_dB 20Hz-20kHz
Dynamic Range >110dB 20Hz-20k unwtd
Distortion < .02%@1kHz,+18dBm<BR>

Maximum Delay 300 mS
Min Step Size 2mS
Input Gain +15dB in 0.1dB steps
Output Gain -60dB - +15dB in 0.1dB steps, and 'Off'


Parametric Equalisation
6 per Channel
Filter Gain +15dB to -30dB in 0.1dB steps.
Frequency Range 20Hz - 20kHz, 1/36 octave steps. (368positions) Filter Q / BW 0.4 to 128 / 2.5 to 0.008
(Sections switched to shelving response)

Low frequency 20Hz - 1kHz
High frequency 1kHz - 20kHz
Shelf gains 15dB in 0.1dB steps.

High and Lowpass Filters, 1 of each per output.
Freq. Range HPF 10Hz - 16kHz 1 / 36 Oct.steps.
Freq. Range LPF 35Hz - 22kHz 1 / 36 Octave.steps.
Responses Bessel/Butterworth 12db/Octave

Dynamics Processing
Dynamic EQ module x 2
Gate/Expander x 2
Compressor x 2
Limiter x 2


Additional Processing
Harmonics Generator
A.D.T.Module


Display 2x24 character backlit LCD
Input meter 2 x 7 point, -18dB to +18dB.
Output meter 2 x 7 point, -18dB to +18dB.
Gain reduction & Threshold metering for each module.


Connectors
Inputs 3 pin female XLR; Outputs 3 pin male XLR.
MIDI In 5 pin DIN;External 9 pin DEE connector (RS232)
RS485 3 pin male XLR (out) 3 pin male XLR (in)
Power 3 pin IEC

Power 60 to 250V 15% @ 50/60Hz.
Consumption < 20 watts.<BR>Weight 3.5kg. Net (4.8kg. Shipping)
Size 1.75"(1U) x 19" x 11.8" (44 x 482 x 300mm)
excluding connectors.
Options [++] =Transformers available.
Optional Interfaces AES/EBU Digital Input/Output

DP324 Architects' Specifications
The digital processor shall provide 2 inputs, 2 main outputs and 2 auxiliary outputs. It shall provide two channels of processing, including 6 bands of parametric EQ, high and low pass filters, a dynamic EQ module, a compressor, a noise gate or expander, and a limiter.

There shall be up to 300mS of delay available on each output, and the ability to provide a separate delay on the two auxiliary outputs of up to 100mS, both in 21m increments. The sidechain of each dynamics module shall contain appropriate EQ sections that may be monitored through the main or auxiliary outputs.


Headroom metering shall be available for inputs and outputs, with additional metering as appropriate to each dynamics module. Parameter information shall be shown on an LCD display. A security lockout facility shall be provided accompanied by full remote control from a PC via RS232, RS485 or MIDI interfaces.

The audio processing shall meet or exceed the following specifications:- Frequency Response +0.5dB 20Hz - 20kHz. Dynamic Range > 110dB 20Hz - 20kHz unw. Parametric Filters: Total of 12 static and 12 sidechain; Gain +15 to -30dB; Centre frequency 20Hz - 20kHz, 1/36 Octave steps; 'Q' 0.4 to 128. Inputs and outputs shall be via XLR connectors and be electronically balanced. The digital audio processor shall be a 1U, 19" rack mount device capable of operating from a 60V AC - 240V AC 50/60Hz supply. The digital audio processor shall be the XTA Electronics model DP324.