[제품설명]
Microflex 구즈넥 콘덴서 마이크 시리즈는 넓은 주파수 반응과 우수한 흡입력,
그리고 정교한 원음 재생력을 갖추고 있는 고급 스피치용 콘덴서 마이크 로서
교회, 법원, 회의실, 방송국 등 다양한 장소에서 사용되고있다. 나사 결합 방식
으로 되어 있어 손쉽게 교체할 수 있는 카트리지는 단일지향성, 전지향성,초지
향성 세가지가 별도 제공되며 Microflex 400시리즈뿐만 아니라 모든Microflex
제품과 호환이 가능하다. 구즈넥의 길이는 5인치, 10인치, 12인치(약 30cm)와
18인치 (약 45cm)의 네 가지가 있으며 탁상에 직접 고정설치 하거나 스탠드와
함께 사용 할 수 있는 형태 등 용도와 상황에 적합한 제품을 선택할 수 있도록
다양한 모델이 제공된다.
Type
Condenser (electret bias)
Frequency Response
Polar Pattern
MX405/C, MX410/C: Cardioid
MX405/S, MX410/S: Supercardioid
Output Impedance
EIA Rated at 150 Ω (170 Ω actual)
Output Configuration
Active balanced
Sensitivity (at 1 kHz , open circuit voltage)
Cardioid: –35 dBV/Pa (18 mV)
Supercardioid: –34 dBV/Pa (21 mV)
1 Pascal=94 dB SPL
Maximum SPL (1 kHz at 1% THD, 1 kΩ load)
Cardioid: 121 dB
Supercardioid: 120 dB
Equivalent Output Noise (A-weighted)
Cardioid: 28 dB SPL
Supercardioid: 27 dB SPL
Signal-to-Noise Ratio (referenced at 94 dB SPL at 1 kHz)
Cardioid: 66 dB
Supercardioid: 68 dB
Dynamic Range (1 kΩ load at 1 kHz)
93 dB
Common Mode Rejection (10 Hz to 100 kHz)
45 dB minimum
Preamplifier Output Clipping Level (1% THD)
–8 dBV (0.4 V)
Polarity
3-Pin XLR: Positive sound pressure on diaphragm produces positive
voltage on pin 2 relative to pin 3 of output XLR connector.
5-Pin XLR: Positive sound pressure on diaphragm produces positive
voltage on pin 4 relative to pin 2 of output XLR connector.
Net Weight
MX405: 0.054 kg (0.119 lbs)
MX410: 0.068 kg (0.150 lbs)
MX400DP: 0.516 kg (1.138 lbs)
MX400SMP (w/ Kit): 0.125 kg (0.275 lbs)
Logic Connections
LED IN: Active low (≤1.0V), TTL compatible. Absolute maximum voltage:
-0.7V to 50V.
LOGIC OUT: Active low (≤1.0V), sinks up to 20mA, TTL compatible.
Absolute maximum voltage: -0.7V to 50V (up to 50V through 3kΩ).
Mute Switch Attenuation
–50 dB minimum
Cable
MX400DP: 6.1 m (20 ft) attached cable with shielded audio pair
terminated at a 3-pin male XLR and three unterminated conductors for
logic control
Environmental Conditions
Operating Temperature: -18–57 °C (0–135 °F)
Storage Temperature: -29–74 °C (-20–165 °F)
Relative Humidity: 0–95%
Power Requirements
48–52 Vdc phantom, 8.0 mA
Type
Condenser (electret bias)
Frequency Response
Polar Pattern
MX405/C, MX410/C: Cardioid
MX405/S, MX410/S: Supercardioid
Output Impedance
EIA Rated at 150 Ω (170 Ω actual)
Output Configuration
Active balanced
Sensitivity (at 1 kHz , open circuit voltage)
Cardioid: –35 dBV/Pa (18 mV)
Supercardioid: –34 dBV/Pa (21 mV)
1 Pascal=94 dB SPL
Maximum SPL (1 kHz at 1% THD, 1 kΩ load)
Cardioid: 121 dB
Supercardioid: 120 dB
Equivalent Output Noise (A-weighted)
Cardioid: 28 dB SPL
Supercardioid: 27 dB SPL
Signal-to-Noise Ratio (referenced at 94 dB SPL at 1 kHz)
Cardioid: 66 dB
Supercardioid: 68 dB
Dynamic Range (1 kΩ load at 1 kHz)
93 dB
Common Mode Rejection (10 Hz to 100 kHz)
45 dB minimum
Preamplifier Output Clipping Level (1% THD)
–8 dBV (0.4 V)
Polarity
3-Pin XLR: Positive sound pressure on diaphragm produces positive
voltage on pin 2 relative to pin 3 of output XLR connector.
5-Pin XLR: Positive sound pressure on diaphragm produces positive
voltage on pin 4 relative to pin 2 of output XLR connector.
Net Weight
MX405: 0.054 kg (0.119 lbs)
MX410: 0.068 kg (0.150 lbs)
MX400DP: 0.516 kg (1.138 lbs)
MX400SMP (w/ Kit): 0.125 kg (0.275 lbs)
Logic Connections
LED IN: Active low (≤1.0V), TTL compatible. Absolute maximum voltage:
-0.7V to 50V.
LOGIC OUT: Active low (≤1.0V), sinks up to 20mA, TTL compatible.
Absolute maximum voltage: -0.7V to 50V (up to 50V through 3kΩ).
Mute Switch Attenuation
–50 dB minimum
Cable
MX400DP: 6.1 m (20 ft) attached cable with shielded audio pair
terminated at a 3-pin male XLR and three unterminated conductors for
logic control
Environmental Conditions
Operating Temperature: -18–57 °C (0–135 °F)
Storage Temperature: -29–74 °C (-20–165 °F)
Relative Humidity: 0–95%
Power Requirements
48–52 Vdc phantom, 8.0 mA