즐겨찾기추가
on on on on on on on on on on on on on on on on
현재위치 : Home > 파워앰프 > CROWN

   
660A [전화상담]
    · 고객선호도 :
    · 제조사 : CROWN
    · 판매가격 :
    · 포 인 트 :
    · 수 량 :

                    (0)                     (0)                     (0)
 
 [제품설명]
 
• Six inputs, six 60W amplifier output channels;
  4-ohm and 70V/100V outputs

• Ideal for commercial and industrial use

• Balanced Phoenix-type line inputs; touchproofed
  screw-terminal speaker outputs

• Advanced protection system includes
  output current limiting, DC protection, circuit
  breaker/fuse, and thermal protection;
  details available online at www.crownaudio.com

• Three-Year, No-Fault, Fully Transferable
  Warranty completely protects your investment
  and guarantees its specifi cations

 *  Optional Accessories
   
    1-VCAP remote volume control for one channel.
    4-VCAP remote volume control for four channels
 
 
 
 [제품스펙]
 
Performance

Frequency Reponse
(at 1 watt from 4-ohm tap):
70 Hz to 19 kHz +/- 1 dB.

Frequency Response
(at line out): 20 Hz to 20
kHz +/- 1 dB.

Power Bandwidth
(at 4-ohm tap, 2 dB below
maxium 1 kHz power): 50 Hz to 20 kHz with
< 0.5% THD.

Signal to Noise Ratio
(ref. to rated power, master
volume at minimum): 85 dB.

DC Output Offset:
< ±5 mV.

THD:
Less than 0.5% at rated power at 1 kHz.

Input Sensitivity
(for full output at maximum
gain): 800 mV.

Input Impedance (nominal):
100 kilohms.

Minimum Load Impedance:
100V output: 160 ohms. 70V output: 80 ohms.
4-ohm output: 4/8 ohms.

Crosstalk (all controls at “10”):
–70 dB at 1kHz.

Load Impedance:
Ch. 1-4: 4 ohms and 70V/100V.
Ch. 5-6: 4 ohms.

AC Line Voltages Available:
100V 50/60 Hz
120V 60 Hz
220V 50/60 Hz
230V 50/60 Hz
240V 50/60 Hz

AC Voltage Tolerance:
+10%/–20%.

Operating Temperature/Humidity:
0° C to 40° C
at 95% relative humidity (non-condensing).

Storage Temperature:
–20° C to 85° C.

Front Panel Controls and Indicators

Power Switch:
Pushbutton on-off switch.

Power Indicator:
Blue LED indicates power on.

Output Signal Presence Indicator:
Green LED,
one for each output channel, illuminates when
output signal level exceeds 100 mV (45 dB below
full power) from the 4-ohm tap.

Clip Indicators:
Red LED, one per output channel.
Illuminates at threshold of audible distortion.

Volume Controls:
One per output channel.
Detented potentiometer with knob.

Tone Controls:
Bass and Treble non-detented
potentiometers on each channel. Bass ±10 dB at
100 Hz, Treble ±10 dB at 10 kHz.

Back Panel Controls and Connectors

Reset Switch:
Resets the circuit breaker that
protects the power supply. 220/230/240V units
have a fuse instead.

Input Connectors:
Detachable 3-pin Phoenix-type,
high-impedance balanced, one per channel.

AC Power Inlet:
Detachable IEC.

Amplifi er Outputs Connectors:
One per channel,
4-position terminal strip with COM (Common), 4
ohms, 70V and 100V terminals for channels 1-4
and one 4-position terminal strip (4 ohms, + and
– for each channel) for channels 5 and 6. Accepts
up to 10 AWG terminal forks. Non-touch cover
included.

VCA Connector:
Each pair of channels has a 4-pin
Phoenix-type connector for two VCA control lines
of +10 VDC and ground. Compatible with Crown
1-VCAP and 4-VCAP modules.

Cooling :
Convection cooled.

Protection

Current Limit Protection:
Included.

Thermal Limit Protection:
Over-temperature
thermal cutout.

DC-Fault Load Protection:
Included.

Turn On/Turn Off:
No thumps or pops.

Included Accessories
Power cord
Detachable rack ears
Screws for rack ears
Non-touch cover for output connectors
Phoenix-type
 
번호 제목 작성자 작성일 평가점수
이 상품에 대한 사용후기가 아직 없습니다.
사용후기를 작성해 주시면 다른 분들께 많은 도움이 됩니다.
 
* 이 상품을 사용해 보셨다면 사용후기를 써 주십시오.
번호 제목 작성자 작성일 답변
이 상품에 대한 질문이 아직 없습니다.
궁금하신 사항은 이곳에 질문하여 주십시오.
 
* 이 상품에 대한 궁금한 사항이 있으신 분은 질문해 주십시오.
배송 내용을 입력하십시오.
교환/반품 내용을 입력하십시오.
이 상품과 관련된 상품이 없습니다.