[제품설명]
| ‧ |
The SIEM-111 System features reliable JTS UHF PLL technology. |
| ‧ |
There are 961 selectable UHF channels available. As many as 16 sets of SIEM-111T transmitters can operate on the same stage. |
| ‧ |
The system offers 4 groups, with each group having 16 compatible preset channels to choose from. This allows the monitor engineer to set up systems quickly and easily. |
| ‧ |
MPX Stereo Audio Transmission / Reception, switchable to Mono operation if desired. |
| ‧ |
All metal case construction on the SIEM 111R and SIEM 111T. |
| ‧ |
The JTS advanced circuitry assures outstanding signal-to-noise ratio. |
| ‧ |
IE-1 and IE-6 earphones seal off the ear canal with JTS designed Dyna-Driver ear buds which reduce undesired stage noise, ambient sound levels. |
| ‧ |
3 pairs of different sized Silicon sleeves included with the IE series earphones ensure a right fit for the users ear canal and comfort. |
‧System Specifications
‧S/N Ratio: 80 dB (A Weighted)
‧Image Rejection: 80 dB
‧Channel Separation: 35 dB
‧Frequency Response: 60~15,000 Hz (-3dB)
‧T.H.D.: 1% Typical
‧Frequency Stability: ±10KHz
| ‧ |
This wideband dynadriver earphone reproduces full range of frequency, natural mids, and full highs and bass. It delivers sound musicians want and should be heard with full detail. |
| ‧ |
Three pairs of silicon sleeve are provided with different sizes for best fitting and sound isolation. |
| ‧ |
Human friendly mechanical structure ensures long time fatigueless wearing. |
| ‧ |
Ergonomic design for long-time wearing without fatigue. |
| Carrier Frequency Range |
925 - 932 MHz |
| RF Output Power |
10 mW |
Nominal Frequency Deviation
(modulation) |
±40KHz |
| Audio Input Impedance |
20kΩ |
| Nominal Input Level |
-10 dBV ; 0 dBV (ATT-10 dBV) |
| Maximal Input Level |
10 dBV ; 20 dBV (ATT-10 dBV) |
| LCD Display |
AF Level, Stereo/Mono, Attenuation Level, Group, Channel, Frequency |
| Audio Input Connector |
2 x Balanced XLR /Ø6.3mm phone Combo Socket |
| Audio Output Connector |
1 x 1/8” Stereo Phone Jack
1 x 1/4” Stereo Phone Jack |
| Loop Out Connector |
2 x Balanced Loop Out Socket |
| Switching Power Supply |
100-240V Switching power supply |
| Input Level Select Switch |
0dB / -10dB |
| Earphone Output. |
60 mW |
| Minimum Load Impedance |
16Ω |
| LCD Display |
RF Level, Lock-On, Battery Fuel Gauge, Stereo/Mono, HF booster,
Dynamic Limiter, Group, Channel, Mute, Frequency |
| Output Connector |
1/8” Stereo Phone Jack |
| Power Supply |
2 AA batteries |
| Operation Hour. |
Over 12 hours | | |
|
현재위치 : 
