Frequency Range (-10 dB) |
37 Hz – 20 kHz |
Frequency Response (±3 dB) |
43 Hz – 20 kHz |
Coverage Pattern |
60° x 60°, rotatable waveguide |
Directivity Factor (Q) |
13.4 |
Directivity Index (DI) |
11.3 dB |
Crossover Modes |
Bi-amp/Passive switchable |
Passive Crossover Frequency |
2 kHz |
Transducer Power Rating (AES) |
LF: 400 W (1600 W peak), 2 hrs 300 W (1200 W peak), 100 hrs HF: 40 W (160 W peak), 2 hrs |
Long-Term System Power Rating(IEC) |
Passive mode: 300 W (1200 W peak), 100 hrs |
Maximum SPL |
Bi-amp mode: LF: 122 dB-SPL cont avg (128 dB peak) HF: 130 dB-SPL cont avg (136 dB peak) Passive mode: 121 dB-SPL cont avg (127 dB peak) |
System Sensitivity (1W @ 1m) |
Passive mode: 96 dB SPL |
Low Frequency Driver |
1 x JBL 262H-1 300 mm (12 in ) driver with 50.8 mm (2 in) dual voice coil |
Nominal Impedance |
8 ohms |
Sensitivity (1W @ 1m, within operational band) |
97 dB SPL |
High Frequency Driver |
JBL 2408H-1, 38 mm (1.5 in) exit compression driver, 38 mm (1.5 in) voice coil |
Nominal Impedance |
8 ohms |
Sensitivity (1W @ 1m) |
114 dB SPL |
Waveguide |
PT-H66HF-1 |
Enclosure |
Trapezoidal with 15 degree side angles, 16 mm (5/8 in) exterior grade 11-ply birch plywood |
Suspension Attachment |
15 points (4 top, 4 bottom, 2 each side, 3 rear), M10 threaded hardware |
Finish |
Black DuraFlex™ finish. White available upon request. |
Grille |
Powder coated 14 gauge perforated steel, with acoustically transparent black foam backing. |
Input Connector |
NL4 Neutrik Speakon® and CE-compliant covered barrier strip terminals. Barrier terminals accept up to 5.2 sq mm (10 AWG) wire or max width 9 mm (.375 in) spade lugs. Speakon in parallel with barrier strip for loop-through. |
Environmental Specifications |
Mil-Std 810; IP-x3 per IEC529. |
Dimensions (H x W x D in vertical cabinet orientation) |
713 x 371 x 458 mm (28.06 x 14.6 x 18.1 in) |
Net Weight |
20.2 kg (45 lb) |
Optional Accessories |
M10 x 35 mm forged shoulder eyebolts with washers U-Bracket MTU-3 |