Elevation 시리즈 라인 어레이 시스템은 시공용과 투어용이 있습니다.
1,000 석 정도의 작은 규모의 소극장에서부터 대형 공연장, 운동장 그리고 야외 공연에
이르기까지 Yorkville의 VTC Pro 시스템은 어떤 용도에도 최선의 선택이 될 것입니다.
기존의 라인 어레이가 가지고 있는 고음부 Wave 프론트 돌출형태로 인해 수평으로 어레이할
새로운 위상변조와 음의 왜곡을 만들어 내지만 VTC Pro 라인어레이는 특허기술인 Synergy 혼과
Paraline 렌즈로 이러한 단점을 극복하여 라인 어레이의 새로운 혁명을 실현하였습니다.
발틱해 15mm 자작나무 합판과 더불어 최고의 유닛만을 엄선하여 채용한 VTC 라인 어레이
시스템은 최고의 사운드 실현과 더불어 견고함과 내구성에서도 최고를 자랑합니다.
The Elevation Series ELS212 Subwoofer is a dual 12”, 4 ohm, 1600-watt subwoofer with long excursion neodymium woofers capable of achieving 134db SPL down to 40Hz at -3db. Using an innovative new technology developed by Tom Danley called a Tapped Horn design (patent pending), the Tapped Horn maximizes driver efficiency by allowing radiation from the rear of the driver to enter the system at a tap, located further down the horn flare towards the mouth.
This tap means output from the rear of the driver is effectively de-coupled from the system at extremely low frequencies, but at higher frequencies it becomes coupled back into the system. When this occurs, the output from the front of the driver (at the throat of the horn) and the output from the rear of the driver (entering at the tap) is in phase, effectively doubling the driver’s radiating surface area (Sd) as far as the horn is concerned.
In real world applications where the measured SPL is comparable for a conventional vented horn design and a tapped horn design, the diaphragm excursion of the driver is greatly reduced due to the acoustical loading of the tapped horn. This decrease in excursion will translate directly into lower distortion, smoother, flatter frequency response and far higher output capability from the Tapped Horn subwoofer design versus conventional horn loading.
The ELS212t (touring) and ELS212i (installation) are built for long term reliability in even the most demanding applications. Elevation Series Tapped Horn subwoofers use high quality proprietary 12-inch neodymium drivers by 18 Sound and are built in North America using a solid grade Baltic birch plywood cabinet construction.
Features:
-
Tapped Horn Subwoofer design (patent pending)
-
Available in Touring and Fixed Installation Versions
-
Excellent for All Throw Distances
-
Unparalleled Clarity, Definition & Punch
-
Advanced DLMS4080 Digital Loudspeaker Management System
-
Unequaled Price/Size/Flexibility/Performance Ratio
-
5/8-inch Baltic birch cabinet construction
-
Designed and Manufactured for VTC Pro Audio in North America
-
제품스팩
Specifications |
Configuration: |
Tapped Horn Passive Subwoofer |
Driver Components: |
12 Long Excursion Neodymium Woofers (x2) |
Frequency Response: |
40Hz - 200Hz (-3dB) 35Hz - 260Hz (-10dB) |
Continuous Power: |
1600 Watts |
Nominal Impedance: |
4 ohms |
Sensitivity (1w/1m): |
103dB (single cabinet measured in free space) |
Maximum SPL: |
134dB (single cabinet measured in free space) |
Enclosure Material: |
5/8 11-ply void free Baltic birch plywood |
Finish: |
Black Ultrathane paint |
Grille: |
Perforated, formed powder coated steel |
Connectors: |
Neutrik Speakon?NL4MPR in parallel (x2) |
Dimensions (DWH, inches): |
33 x 28.4 x 22.5 |
Dimensions (DWH, cm): |
83.8 x 72.1 x 57.2 |
Weight (lbs/kg): |
169.5 / 77 |